MPEG-2 IP Encoder ( AV in and ASI+IP/UDP out)

1.Support MPEG-2MP@ML (4:2:0) 2.Support SDI video and audio input; 3.Support IP output 4.Rich i/o 5.Local and remote control

Overview:

MPEG-2 IP encoder is an easy to use, powerful MPEG-2 encoder. Support video and audio signals with a variety of standard. Compressed data output format is ASI. Compression matter is MPEG-2MP@ML. The encoder makes audio and video signals in real-time encoding and re-use and generate DVB transport stream. It is in full compliance with MPEG-2 standard with a strong compatibility. Its volume is IU computer case. It can completely off-line set and run by the front panel LCD display.

Features:    

. Support MPEG-2MP@ML (4:2:0) coding;

. Support SDI video and audio input;

. Start fast;

. Support all hardware IP output;

. High-fidelity audio processing R/L channel, stereo input;

. Output bit rate continuously adjustable, flexible and easy to use;

. Rich input-output interface to achieve freedom of access;

. SDT insertion;

. Local and remote control of network management;

. LCD display, easy and flexible operation;

. High reliability design, stable operation.

Technical Specification:

Input	Video signal	LEV 1.0Vp-p,CVBS
	Audio signal	LEV 2Vp-p
Output	ASI	DVB standard,BNC
	IP out	188 bytes TS packet in UDP payload
	protocol	Unicast and multicast
Code rate		1.0~15Mbps continuously adjustable
Control		NMS(Ethernet Port,RJ-45), Keyboard+LCD
Video Coding		In compliance withISO11162(MPEG-1)&ISO13818 (MPEG-2)
		MPEG-2 coding adopt MP@ML(4:2:0)
		MPEG-2 Adaptive Field Frame (AFF)
		MPEG-2 field based (FB)
audio coding	sampling	32KHz,44.1KHz,48KHz
	code rate	64,128,192,256,384Kbps
	property	MPEG-1 1/2layer,DVD quality
		Support one-channel stereo or dual-channel
Resolution	standard	Compliance with CCIR601support1/2D1,2/3D1,3/4D1
	PAL	720*576,704*576,640*576,544*576,480*576,384*576,352*576
	NTSC	720*480,704*480,640*480,544*480,480*480,384*480,352*480
General Features	Size	44mm*482 mm*240mm
	Environment	0~45(Operating);-20~80(Storage)
	Power	220VAC±10%,50Hz,25W

NMS OPERATION

Network management software can set and control all the encoder parameters from PC in local network or internet

NMS menu (picture )

Connect encoder to PC via RJ 45 cable

1 Click” add freq node” to build a frequency node

2 Then click” add device” to add a device. Here please select “encoder”

3. Name the equipment and input IP address (default is 192.168.0.110), then click” ok”

4. After connection, you can set all parameter in software the same as front panel settings

 

 related products:

 

MPEG-2 1-channel encoder(AV in and ASI out)	SC-1101
MPEG-2 4IN1 encoder(4 AV in and ASI out)	SC-1102
MPEG-2 5IN1 encoder(4 AV + ASI in and ASI out)	SC-1103
MPEG-2 Encoder(AV+YCbCr in and ASI out)	SC-1112
MPEG-2 Encoder(AV+SDI in and ASI out)	SC-1122
MPEG-2 IP Encoder(AV in and ASI+IP/UDP out)	SC-1114
MPEG-2 IP Encoder(SDI+AV in and ASI+IP/UDP out)	SC-1104
MPEG-2 IP Encoder(SDI+AV in and ASI+IP/RTP out)	SC-1124
MPEG-2 4IN1 IP encoder(4AV in,ASI+IP/MPTS/Multicast/unicast out)	SC-1108
MPEG-2 4Channel IP encoder(4AV in,4UDP/SPTS/Multicast out)	SC-1110

We will supply you the best quality, good price and short delivery time. Your kindly enquiry will be highly appreciated.

MPEG-2 IP Encoder ( AV in and ASI+IP/UDP out)